Cisco Small Business 200, Руководство администратора

Страница: 250 / 351

IP Configuration
IPv4 Management and Interfaces
237 Cisco Small Business 200 Series Smart Switch Administration Guide
16
To define IPv6 neighbors:
STEP 1
Click Administration > Management Interface > IPv6 Neighbors
STEP 1
STEP 2
You can select a Clear Table option to clear some or all of IPv6 addresses in the
IPv6 Neighbors Table.
• Static Only—Deletes the static IPv6 address entries.
• Dynamic Only—Deletes the dynamic IPv6 address entries.
• All Dynamic & Static—Deletes the static and dynamic address entries IPv6
address entries.
The following fields are displayed for the neighboring interfaces:
• Interface —Neighboring IPv6 interface type.
• IPv6 Address —IPv6 address of a neighbor.
• MAC Address —MAC address mapped to the specified IPv6 address.
• Type —Neighbor discovery cache information entry type (static or dynamic).
• State —Specifies the IPv6 neighbor status. The values are:
- Incomplete —Address resolution is working. The neighbor has not yet
responded.
-
Reachable
—Neighbor is known to be reachable.
- Stale —Previously-known neighbor is unreachable. No action is taken to
verify its reachability until traffic must be sent.
-
Delay
—Previously-known neighbor is unreachable. The interface is in
Delay state for a predefined Delay Time. If no reachability confirmation is
received, the state changes to Probe.
- Probe —Neighbor is no longer known to be reachable, and Unicast
Neighbor Solicitation probes are being sent to verify the reachability.
• Router —Specifies whether the neighbor is a router ( Yes or No ).
STEP 3
To add a neighbor to the table, click Add .
STEP 4
Enter values for the following fields:
• Interface —The neighboring IPv6 interface to be added.