Cisco Small Business 200, Руководство администратора

Страница: 132 / 351

Port Management
Configuring Link Aggregation
119 Cisco Small Business 200 Series Smart Switch Administration Guide
9
STEP 3
Click Apply . The Load Balance Algorithm is saved to the Running Configuration file.
To define the member or candidate ports in a LAG.
STEP 1
Select the LAG to be configured, and click Edit.
STEP 2
Enter the values for the following fields:
• LAG —Select the LAG number.
• LAG Name —Enter the LAG name or a comment.
• LACP —Select to enable LACP on the selected LAG. This makes it a dynamic
LAG. This field can only be enabled after moving a port to the LAG in the next
field.
• Port List —Move those ports that are to be assigned to the LAG from the
Port List to the LAG Members list. Up to eight ports per static LAG can be
assigned, and 16 ports can be assigned to a dynamic LAG.
STEP 3
Click Apply . LAG membership is saved to the Running Configuration file.
Configuring LAG Settings
The LAG Settings page displays a table of current settings for all LAGs. You can
configure the settings of selected LAGs, and reactivate suspended LAGs by
launching the Edit LAG Settings page.
To configure the LAG settings or reactivate a suspended LAG:
STEP 1
Click Port Management > Link Aggregation > LAG Settings .
STEP 2
Select a LAG, and click Edit .
STEP 3
Enter the values for the following fields:
• LAG —Select the LAG ID number.
• Description —Enter the LAG name or a comment.
• LAG Type —Displays the port type that comprises the LAG.
• Administrative Status —Set the selected LAG to be Up or Down.
• Operational Status —Displays whether the LAG is currently operating.