Cisco Small Business 200, Руководство администратора

Страница: 256 / 351

IP Configuration
Domain Name
243 Cisco Small Business 200 Series Smart Switch Administration Guide
16
-
OK
—Attempt succeeded.
- Negative Cache —Attempt failed, do not try again.
-
No Response
—There was no response, but system can try again in
future.
• TTL — If this is a dynamic entry, how long will it remain in the cache.
• Remaining TTL — If this is a dynamic entry, how much longer will it remain in
the cache.
STEP 3
To add a host mapping, click Add .
STEP 4
Enter the parameters.
• IP Version —Select Version 6 for IPv6 or Version 4 for IPv4.
• IPv6 Address Type —Select the IPv6 address type (if IPv6 is used). The
options are:
- Link Local —The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80 , is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
- Global —The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
• Link Local Interface —If the IPv6 address type is Link Local, select the
interface through which it is received.
• Host Name —Enter a user-defined host name or fully-qualified name. Host
names are restricted to the ASCII letters A through Z (case-insensitive), the
digits 0 through 9, the underscore and the hyphen. A period (.) is used to
separate labels.
• IP Address(es) —Enter a single address or up to eight associated IP
addresses (IPv4 or IPv6).