Cisco Small Business 200, Руководство администратора

Страница: 267 / 351

Security
Defining Management Access Method
Cisco Small Business 200 Series Smart Switch Administration Guide 254
17
A caution message displays if you selected any other access profile, warning you
that, depending on the selected access profile, you might be disconnected from
the web-based configuration utility.
STEP 3
Click OK to select the active access profile or click Cancel to discontinue the
action.
STEP 4
Click Add to open the Add Access Profile page. The page allows you to configure
a new profile and one rule.
STEP 5
Enter the Access Profile Name . This name can contain up to 32 characters.
STEP 6
Enter the parameters.
• Rule Priority —Enter the rule priority. When the packet is matched to a rule,
user groups are either granted or denied access to the device. The rule
priority is essential to matching packets to rules, as packets are matched on
a first-match basis. One is the highest priority.
• Management Method —Select the management method for which the rule
is defined. The options are:
- All —Assigns all management methods to the rule.
- HTTP — Users requesting access to the device that meets the HTTP
access profile criteria, are permitted or denied.
- Secure HTTP (HTTPS) —Users requesting access to the device that
meets the HTTPS access profile criteria, are permitted or denied.
- SNMP —Users requesting access to the device that meets the SNMP
access profile criteria are permitted or denied.
• Action —Select the action attached to the rule. The options are:
- Permit —Permits access to the device if the user matches the settings in
the profile.
- Deny —Denies access to the device if the user matches the settings in
the profile.
• Applies to Interface —Select the interface attached to the rule. The options
are:
- All —Applies to all ports, VLANs, and LAGs.
- User Defined —Applies to selected interface.
• Interface —Enter the interface number if User Defined was selected.