Viewing Statistics
Etherlike Statistics
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
22
3
Etherlike Statistics
The system collects and reports statistics on ports and LAGs in accordance with
RFC2665.
To display this page, click
Status and Statistics
>
Etherlike
in the navigation
window.
Select the interface (Port or LAG) for which you want to display statistics, then
select a refresh rate for the statistics. These statistics are cumulative since the last
time the page was refreshed. The following information displays for the selected
interface:
•
Frame Check Sequence (FCS) Errors
—FCS errors received.
•
Single Collision Frames
—Signal collision frame errors received.
•
Late Collisions
—Late collision frames received.
•
Excessive Collisions
—Excessive collision frames received.
•
Multiple Collisions
—Multiple collision frames received.
•
Oversize Packets
—Packets received that were longer than 1518 octets
(excluding framing bits and including FCS octets) and were otherwise well-
formed.
•
Internal MAC Receive Errors
—Internal MAC errors received on the LAG or
interface.
•
Alignment Errors
—Packets received with alignment errors
•
Pause Frames Received
—Pause frames received on the LAG or interface.
•
Pause Frames Transmitted
—Pause frames transmitted from the LAG or
interface.
To clear statistics counters:
•
Click
Clear Interface Counters
to reset all counters to 0 for the selected
interface.
•
Click
Clear All Interface Counters
to reset all counters to 0 for all
interfaces.
