1-6
VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide
OL-5979-03
Chapter 1 Overview
Supported Standards, MIBs, and RFCs
Supported Standards, MIBs, and RFCs
This section describes the standards, Management Information Bases (MIBs), and Request for
Comments (RFCs) supported on the SA-VAM2+. Requests for Comments (RFCs) contain information
about the supported Internet suite of protocols.
Standards
•
IPPCP: RFC 2393, 2395
•
IPSec/IKE: RFCs 2401-2411, 2451
MIBs
•
CISCO-IPSEC-FLOW-MONITOR-MIB
•
CISCO-IPSEC-MIB
•
CISCO-IPSEC-POLICY-MAP-MIB
To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules,
go to the Cisco MIB website on Cisco.com at the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
RFCs
•
IPPCP: RFC 2393, 2395
•
IPSec/IKE: RFCs 2401-2411, 2451
Cisco 7200VXR
with NPE-400
Up to 248 Mbps
Cisco IOS release: c7200-jk9o3s-mz.124-4.T1
7200VXR/NPE400/SA-VAM2+, 512MB system memory
3DES/SHA, preshared with no IKE-keepalive configured
Up to 251 Mbps
Cisco IOS release: c7200-jk9o3s-mz. 124-4.T1
17200VXR/NPE400/single SA-VAM2+, 512MB system
memory
AES/SHA, preshared with no IKE-keepalive configured
Cisco 7200VXR
with NPE-225
Up to 191 Mbps
Cisco IOS release: c7200-jk9o3s-mz.123-10
2
7200VXR/NPE225/single VAM2+, 256MB system memory
3DES/SHA, preshared with no IKE-keepalive configured
1.
As measured with IPSec 3DES Hashed Message Authentication Code (HMAC)-SHA-1 on 1400-byte packets. Performance
varies depending on the number of modules, bandwidth, traffic volume, Cisco IOS release, etc.
2.
Using Cisco 12.3-10 image. Performance varies by Cisco IOS release. It is recommended that you download the most recent
image for your Cisco 7200VXR or Cisco 7301 router.
Table 1-2
Performance for SA-VAM2+ (continued)
Cisco Router
Throughput
1
2
Description