Cisco SA-VAM - VPN Acceleration Module Скачать руководство пользователя | Manualshive

Страница: 28 / 69

background image

2-2

VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide

OL-5979-03

Chapter 2 Preparing for Installation

Hardware and Software Requirements

Software Requirements

Table 2-1

lists the recommended minimum Cisco IOS software release required to use the SA-VAM2+

in supported router or switch platforms. Use the

show version

command to display the system software

version that is currently loaded and running.

To check the minimum software requirements of Cisco IOS software with the hardware installed on your
router, Cisco maintains the Software Advisor tool on Cisco.com. Registered Cisco Direct users can
access the S

oftware Advisor at

:

http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl.

This tool does

not verify whether modules within a system are compatible, but it does provide the minimum Cisco IOS
software requirements for individual hardware modules or components.

Note

Access to this tool is limited to users with Cisco.com login accounts.

Hardware Requirements

Specific hardware prerequisites that ensure proper operation of the SA-VAM2+ follow:

•

The SA-VAM2+ is compatible with the NPE-225, NPE-400, NPE-G1 or NPE-G2 processor on the
Cisco 7200VXR routers. For more efficient performance, we recommend 512 MB of memory.

•

For routers using SA-VAM2+, we recommend a minimum configuration of 256 MB of memory; for
more efficient performance, we recommend 512 MB of memory.

•

The SA-VAM2+ utilizes a specific number of bandwidth points in functioning, which affect
performance. For more information on bandwidth requirements, see the

Cisco 7200 Series Port

Adapter Hardware Configuration Guidelines.

Table 2-1

SA-VAM2+ Software Requirements

Platform

Recommended Minimum Cisco IOS Release

1

1.

The Cisco IOS Release 12.2(14)SU is no longer available for sale.

Cisco 7200VXR router

Cisco IOS Release 12.3(12a)M or a later release of Cisco IOS Release 12.3M

Cisco IOS Release 12.3(11)T3 or later release of 12.3T3

Cisco 7200VXR router with the
NPE-G2 processor

Cisco IOS Release 12.4(4)XD1 or later release of 12.4(4)XD1

2

2.

The Cisco 7200VXR router with the NPE-G2 processor is only available with Cisco IOS Release 12.4(4)XD.

Cisco 7301 router

Cisco IOS Release 12.3(12a)M or a later release of Cisco IOS Release 12.3M

Cisco IOS Release 12.3(11)T3 or later release of 12.3T3

(Optional) Cisco 7200VXR Router
with the Port Adapter Jacket Card

Cisco IOS Release 12.4(6)T or later release of Cisco IOS Release 12.4T

Cisco IOS Release 12.4(7) or later release of Cisco IOS Release 12.4M

Cisco IOS Release 12.4(4)XD1 or later release of Cisco IOS Release 12.4(4)XD1

Note

The Port Adapter Jacket Card supported on the Cisco 7200VXR router with
the NPE-G1 is available on Cisco IOS Release 12.4(6)T and 12.4(7) or later.

The Port Adapter Jacket Card supported on the Cisco 7200VXR router with
the NPE-G2 is available on Cisco IOS Release 12.4(4)XD or later.

«
...
26
27
28
29
30
...
»

Содержание SA-VAM - VPN Acceleration Module






































































Отзывы:

Нет отзывов

Похожие инструкции для SA-VAM - VPN Acceleration Module

Бренд: D-Link Страницы: 12

Бренд: XMG Страницы: 5

Бренд: Habitat Страницы: 48

Бренд: NAD Страницы: 2

3CR860-95 - OfficeConnect Secure Router

Бренд: 3Com Страницы: 2

Бренд: 3Com Страницы: 26

Бренд: VMIC Страницы: 126

Бренд: Conceptronic Страницы: 230

Бренд: Watchguard Страницы: 40

Бренд: ZALMAN Страницы: 7

Бренд: Dataprobe Страницы: 16

GS2020E GigaSPIRE BLAST

Бренд: Calix Страницы: 15

Бренд: Alcatel Страницы: 4

ExtremeCloud Appliance E1120

Бренд: Extreme Networks Страницы: 219

Бренд: Tenda Страницы: 82

Бренд: Rane Страницы: 6

Wisenet XRN-6410DB4

Бренд: Hanwha Techwin Страницы: 118

ControlCenter-IP 2.0

Бренд: G&D Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды