Cisco SA-VAM - VPN Acceleration Module Скачать руководство пользователя | Manualshive

Страница: 29 / 69

background image

2-3

VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide

OL-5979-03

Chapter 2 Preparing for Installation

Safety Guidelines

Restrictions

The SA-VAM2+ has the following restrictions:

•

SA-VAM2+ does not interoperate with other crypto cards, such as ISA, VAM, or VAM2, in a single
Cisco 7204VXR or Cisco 7206VXR.

•

The Cisco 7301 router only supports a single port adapter.

•

Dual SA-VAM2+ cards are only supported on the Cisco 7200VXR routers with the NPE-G1 or
NPE-G2 processor.

•

(Optional) SA-VAM2+ is only supported in a Port Adapter Jacket Card on Cisco 7200VXR routers
with an NPE-G1 or NPE-G2 processor. See the

Port Adapter Jacket Card Installation Guide

for more

information about the Port Adapter Jacket Card.

The Port Adapter Jacket Card supported on the Cisco 7200VXR router with the NPE-G1 is available
on Cisco IOS Release 12.4(6)T and 12.4(7) or later.

The Port Adapter Jacket Card supported on the Cisco 7200VXR router with the NPE-G2 is available
on Cisco IOS Release 12.4 (XD) or later.

Safety Guidelines

This section provides safety guidelines that you should follow when working with any equipment that
connects to electrical power or telephone wiring. This section includes the following topics:

•

Safety Warnings and Guidelines, page 2-3

•

Electrical Equipment Guidelines, page 2-4

•

Preventing Electrostatic Discharge Damage, page 2-4

Safety Warnings and Guidelines

Safety warnings appear throughout this publication in procedures that, if performed incorrectly, might
harm you. A warning symbol precedes each warning statement.

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Ultimate disposal of this product should be handled according to all national laws and regulations.

Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing.

Warning

Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.

«
...
27
28
29
30
31
...
»

Содержание SA-VAM - VPN Acceleration Module






































































Отзывы:

Нет отзывов

Похожие инструкции для SA-VAM - VPN Acceleration Module

Бренд: Patton electronics Страницы: 2

MatrixPRO-II DVI 16x16

Бренд: Barco Страницы: 43

Бренд: Barco Страницы: 5

S5500-HI Switch Series

Бренд: H3C Страницы: 180

Бренд: H3C Страницы: 84

Бренд: H3C Страницы: 281

Бренд: H3C Страницы: 8

Бренд: H3C Страницы: 9

Бренд: H3C Страницы: 33

Бренд: H3C Страницы: 42

Бренд: H3C Страницы: 102

S12500CR Series

Бренд: H3C Страницы: 9

Бренд: H3C Страницы: 15

H3C S7500E Series

Бренд: H3C Страницы: 1565

Бренд: H3C Страницы: 4

Бренд: Lanpro Страницы: 5

S5120V3-EI Series

Бренд: H3C Страницы: 54

Бренд: Ublox Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды