Cisco SA-VAM - VPN Acceleration Module страница 34 Скачать руководство пользователя | Manualshive

Страница: 34 / 69

background image

3-2

VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide

OL-5979-03

Chapter 3 Removing and Installing the SA-VAM2+

Online Insertion and Removal (OIR)

Online Insertion and Removal (OIR)

The Online Insertion and Removal (OIR) feature is described in this section.

SA-VAM2+

Online insertion and removal (OIR) is supported on the SA-VAM2+. Before removing the SA-VAM2+,
we recommend that you shut down the interface so that there is no traffic running through the
SA-VAM2+ when it is removed. Removing a SA-VAM2+ while traffic is flowing through the ports can
cause system disruption.

Port Adapter Jacket Card

OIR on the Port Adapter Jacket Card is not supported; however, the SA-VAM2+ within the Port Adapter
Jacket Card does support OIR. You must have the chassis powered off to install or remove the Port
Adapter Jacket Card. See the

Port Adapter Jacket Card Installation Guide

for more information about

the Port Adapter Jacket Card.

Warnings and Cautions

Observe the following warnings and cautions when installing or removing VPN acceleration modules.

Warning

Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.

The safety cover is an integral part of the product. Do not operate the unit without the safety cover
installed. Operating the unit without the cover in place will invalidate the safety approvals and pose
a risk of fire and electrical hazards.

Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings,
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals.

Keep hands and fingers out of the power supply bays. High voltage is present on the power backplane
when the system is running.

SA-VAM2+ Removal and Installation

This section describes how to remove and install the SA-VAM2+, and covers the following topics:

•

Cisco 7200VXR Router Port Adapter Jacket Card, page 3-3

•

Cisco 7200VXR Series Routers, page 3-4

«
...
32
33
34
35
36
...
»

Содержание SA-VAM - VPN Acceleration Module






































































Отзывы:

Нет отзывов

Похожие инструкции для SA-VAM - VPN Acceleration Module

TokenLink 3C359B

Бренд: 3Com Страницы: 4

TokenLink 3C359B

Бренд: 3Com Страницы: 8

TokenLink 3C339

Бренд: 3Com Страницы: 2

EtherLink 3C985B-SX

Бренд: 3Com Страницы: 44

Бренд: 3Com Страницы: 88

Бренд: 3Com Страницы: 2

Бренд: 3Com Страницы: 111

TokenLink 3C359

Бренд: 3Com Страницы: 4

Бренд: 3Com Страницы: 74

Бренд: 3Com Страницы: 6

MatrixPRO-II DVI 16x16

Бренд: Barco Страницы: 43

Бренд: Barco Страницы: 5

Ray 3 Plus Client

Бренд: Sun Microsystems Страницы: 6

Бренд: Eaton Страницы: 10

Бренд: IEI Technology Страницы: 187

Бренд: IEI Technology Страницы: 71

Бренд: Accusys Страницы: 34

Бренд: IDT Страницы: 281

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды