![background image](http://html.mh-extra.com/html/cisco/rf-gateway-1-modules/rf-gateway-1-modules_configuration-manual_64976075.webp)
Clock Configuration
78-4025112-01 Rev H0
51
4
In the
Backup SNTP Server IP Address
field, enter the IP address in xx.xx.xx.xx
format.
5
In the
SNTP Mode
field, select "Unicast" (Multicast is not supported).
6
In the
Time Zone
field, select the correct time zone depending on current location.
7
The
Synchronization Interval
parameter specifies the interval at which the RF
Gateway 1 resynchronizes the system clock and RTC to the network time. Set the
SNTP Synchronization rate in minutes. The default is 1440 minutes or 24 hours.
8
The
Synchronization Timeout
parameter specifies how long the RF Gateway waits
for the network time server to respond. Set the timeout in seconds.
9
Click
Apply.
10
Click
Synchronize Now
to force a network synchronization. This sets the
system's time and RTC.
11
Click
Save
.
Result:
On the next system reboot, the system time is displayed in periodic
intervals based on the Synchronization Interval setting.
Parameters
The following table explains the Clock Configuration parameters.
Parameter
Description
Current Time
System's current time.
New Time
System's new time.
Synchronize with Server
Specifies the source of time synchronization, network time server
or on-board real-time clock.
Main SNTP Server IP
Address
IP address of the Main SNTP server.
Backup SNTP Server IP
Address
IP address of the Backup SNTP server.
SNTP Mode
Always set to Unicast.
Time Zone (Offset from
UTC)
Used to configure an offset from UTC time.
Synchronization Interval
Specifies the interval at which the system resynchronizes the
system clock and RTC to the network time.
Synchronization Timeout Specifies how long the RF Gateway waits for the network time
server to respond.
Last Synchronized Time
Indicates when the last successful network synchronization
occurred.
Additional Configuration
The RF Gateway 1 provides several additional configuration parameters applicable
as needed.
Содержание RF Gateway 1 Modules
