Cisco RF Gateway 1 Modules, Руководство по настройке

Страница: 21 / 286

Laser Safety
78-4025112-01 Rev H0 xix
Laser Safety
Introduction
This equipment can be provided with an infrared laser that transmits intensity-
modulated light and emits invisible laser radiation.
Warning: Radiation
WARNING:

Avoid personal injury! Use of controls, adjustments, or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.

Avoid personal injury! The laser light source on the equipment emits
invisible laser radiation. Avoid direct exposure to the laser light source.

Avoid personal injury! Viewing the laser output with optical instruments
(such as eye loupes, magnifiers, or microscopes) within a distance of 100
mm may pose an eye hazard.

Do not apply power to the equipment if the fiber is unmated or unterminated.

Do not stare into an unmated fiber or at any mirror-like surface that could reflect
light that is emitted from an unterminated fiber.

Do not view an activated fiber with optical instruments (e.g., eye loupes,
magnifiers, microscopes).

Use safety-approved optical fiber cable to maintain compliance with applicable
laser safety requirements.
Warning: Fiber Optic Cables
WARNING:
Avoid personal injury! Qualified service personnel may only perform the
procedures in this document. Wear safety glasses and use extreme caution
when handling fiber optic cables, particularly during splicing or terminating
operations. The thin glass fiber core at the center of the cable is fragile when
exposed by the removal of cladding and buffer material. It easily fragments
into glass splinters. Using tweezers, place splinters immediately in a sealed
waste container and dispose of them safely in accordance with local
regulations.