Cisco Catalyst 3650 Series, Справочник по командам

Страница: 769 / 1108

device-role (IPv6 snooping)
To specify the role of the device attached to the port, use the device-role command in IPv6 snooping
configuration mode.
device-role
{
node
|
switch
}
Syntax Description
Sets the role of the attached device to node.
node
Sets the role of the attached device to switch.
switch
Command Default
The device role is node.
Command Modes
IPv6 snooping configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The device-role command specifies the role of the device attached to the port. By default, the device role is
node.
The switch keyword indicates that the remote device is a switch and that the local switch is now operating in
multiswitch mode; binding entries learned from the port will be marked with trunk_port preference level. If
the port is configured as a trust-port, binding entries will be marked with trunk_trusted_port preference level.
Examples This example shows how to define an IPv6 snooping policy name as policy1, place the device in IPv6 snooping
configuration mode, and configure the device as the node:
Device(config)# ipv6 snooping policy policy1
Device(config-ipv6-snooping)# device-role node
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
743
device-role (IPv6 snooping)