Cisco Catalyst 3650 Series, Справочник по командам

Страница: 456 / 1108

flow exporter
To create a Flexible NetFlow flow exporter, or to modify an existing Flexible NetFlow flow exporter, and
enter Flexible NetFlow flow exporter configuration mode, use the
flow exporter command in global
configuration mode. To remove a Flexible NetFlow flow exporter, use the no form of this command.
flow exporter exporter-name
no flow exporter exporter-name
Syntax Description
Name of the flow exporter that is being created or modified. exporter-name
Command Default
Flexible NetFlow flow exporters are not present in the configuration.
Command Modes
Global configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SE
Usage Guidelines
Flow exporters export the data in the flow monitor cache to a remote system, such as a server running NetFlow
collector, for analysis and storage. Flow exporters are created as separate entities in the configuration. Flow
exporters are assigned to flow monitors to provide data export capability for the flow monitors. You can create
several flow exporters and assign them to one or more flow monitors to provide several export destinations.
You can create one flow exporter and apply it to several flow monitors.
Examples The following example creates a flow exporter named FLOW-EXPORTER-1 and enters Flexible NetFlow
flow exporter configuration mode:
Device(config)#
flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
430
flow exporter