Cisco Catalyst 3650 Series, Справочник по командам

Страница: 362 / 1108

show etherchannel
To display EtherChannel information for a channel, use the show etherchannel command in user EXEC
mode.
show etherchannel
[ channel-group-number | {
detail | port | port-channel | protocol | summary
}] | [
auto|
detail| load-balance | port| port-channel| protocol| summary ]
Syntax Description
(Optional) Channel group number. The range is 1 to 128. channel-group-number
(Optional) Displays that Etherchannel is created
automatically.
auto
(Optional) Displays detailed EtherChannel information.
detail
(Optional) Displays the load-balance or frame-distribution
scheme among ports in the port channel.
load-balance
(Optional) Displays EtherChannel port information. port
(Optional) Displays port-channel information. port-channel
(Optional) Displays the protocol that is being used in the
channel. protocol
(Optional) Displays a one-line summary per channel group. summary
Command Default
None
Command Modes
User EXEC
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SE
Usage Guidelines
If you do not specify a channel group number, all channel groups are displayed.
Examples This is an example of output from the
show etherchannel auto
command:
device#
show etherchannel auto
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
336
show etherchannel