Cisco Catalyst 3650 Series, Справочник по командам

Страница: 33 / 1108

Editing Commands through Keystrokes
This table shows the keystrokes that you need to edit command lines. These keystrokes are optional.
The arrow keys function only on ANSI-compatible terminals such as VT100s.
Note
Table 5: Editing Commands through Keystrokes
Purpose Keystroke Capability
Moves the cursor back one
character. Press
Ctrl-B
, or press the left
arrow key.
Move around the command line to
make changes or corrections.
Moves the cursor forward one
character. Press Ctrl-F , or press the right
arrow key.
Moves the cursor to the beginning
of the command line. Press
Ctrl-A
.
Moves the cursor to the end of the
command line. Press Ctrl-E .
Moves the cursor back one word. Press
Esc B
.
Moves the cursor forward one
word. Press Esc F .
Transposes the character to the left
of the cursor with the character
located at the cursor. Press
Ctrl-T
.
Recalls the most recent entry in the
buffer. Press Ctrl-Y. Recall commands from the buffer
and paste them in the command
line. The switch provides a buffer
with the last ten items that you
deleted.
Recalls the next buffer entry.
The buffer contains only the last
10 items that you have deleted or
cut. If you press
Esc Y more than
ten times, you cycle to the first
buffer entry.
Press Esc Y .
Erases the character to the left of
the cursor. Press the Delete or Backspace key. Delete entries if you make a
mistake or change your mind.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
7
Using the Command-Line Interface
Using Editing Features