Cisco Catalyst 3650 Series, Справочник по командам

Страница: 628 / 1108

auto qos classify
To automatically configure quality of service (QoS) classification for untrusted devices within a QoS domain,
use the
auto qos classify command in interface configuration mode. To return to the default setting, use the
no form of this command.
auto qos classify [police]
no auto qos classify [police]
Syntax Description
(Optional) Configure QoS policing for untrusted devices. police
Command Default
Auto-QoS classify is disabled on the port.
Command Modes
Interface configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use this command to configure the QoS for trusted interfaces within the QoS domain. The QoS domain
includes the device, the network interior, and edge devices that can classify incoming traffic for QoS.
When auto-QoS is enabled, it uses the ingress packet label to categorize traffic, to assign packet labels, and
to configure the ingress and egress queues.
Table 29: Auto-QoS Configuration for the Egress Queues
Queue (Buffer)
Size for 10/100
Ethernet Ports Queue (Buffer)
Size for
Gigabit-Capable
Ports Queue Weight
(Bandwidth) CoS-to-Queue
Map Queue Number Egress Queue
15 percent 25 percent up to 100
percent 4, 5 1 Priority (shaped)
25 percent 25 percent 10 percent 2, 3, 6,7 2 SRR shared
40 percent 25 percent 60 percent 0 3 SRR shared
20 percent 25 percent 20 percent 1 4 SRR shared
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
602
auto qos classify