Cisco Catalyst 2360, Руководство по настройке программного обеспечения

Страница: 429 / 554

26-17
Catalyst 2360 Switch Software Configuration Guide
OL-19808-01
Chapter 26 Configuring EtherChannels and Link-State Tracking
Displaying EtherChannel, PAgP, and LACP Status
Note
If LACP is not able to aggregate all the ports that are compatible (for example, the remote system might
have more restrictive hardware limitations), all the ports that cannot be actively included in the
EtherChannel are put in the hot-standby state and are used only if one of the channeled ports fails.
Beginning in privileged EXEC mode, follow these steps to configure the LACP port priority. This
procedure is optional.
To return the LACP port priority to the default value, use the no lacp port-priority interface
configuration command.
Displaying EtherChannel, PAgP, and LACP Status
To display EtherChannel, PAgP, and LACP status information, use the privileged EXEC commands
described in
Table 26-4 :
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
interface interface-id Specify the port to be configured, and enter interface configuration
mode.
Step 3 lacp port-priority priority Configure the LACP port priority.
For priority , the range is 1 to 65535. The default is 32768. The lower the
value, the more likely that the port will be used for LACP transmission.
Step 4
end Return to privileged EXEC mode.
Step 5 show running-config
or
show lacp [ channel-group-number ]
internal
Verify your entries.
Step 6 copy running-config startup-config (Optional) Save your entries in the configuration file.
Table 26-4 Commands for Displaying EtherChannel, PAgP, and LACP Status
Command Description
show etherchannel [ channel-group-number { detail |
port | port-channel | protocol | summary }] { detail |
load-balance | port | port-channel | protocol |
summary }
Displays EtherChannel information in a brief, detailed, and
one-line summary form. Also displays the load-balance or
frame-distribution scheme, port, port-channel, and protocol
information.
show pagp [ channel-group-number ] { counters |
internal | neighbor }
Displays PAgP information such as traffic information, the
internal PAgP configuration, and neighbor information.
show pagp [ channel-group-number ] dual-active Displays the dual-active detection status.
show lacp [ channel-group-number ] { counters |
internal | neighbor }
Displays LACP information such as traffic information, the
internal LACP configuration, and neighbor information.