Cisco Catalyst 2360, Руководство по настройке программного обеспечения

Страница: 350 / 554

20-12
Catalyst 2360 Switch Software Configuration Guide
OL-19808-01
Chapter 20 Configuring SPAN
Displaying SPAN Status
To monitor all VLANs on the trunk port, use the no monitor session session_number filter global
configuration command.
This example shows how to remove any existing configuration on SPAN session 1, configure SPAN
session 1 to monitor traffic received on Gigabit Ethernet trunk port 2, and send traffic for only VLANs 1
through 5 and VLAN 9 to destination Gigabit Ethernet port 1.
Switch(config)# no monitor session 1
Switch(config)# monitor session 1 source interface gigabitethernet0/2 rx
Switch(config)# monitor session 1 filter vlan 1 - 5 , 9
Switch(config)# monitor session 1 destination interface gigabitethernet0/1
Switch(config)# end
Displaying SPAN Status
To display the current SPAN configuration, use the show monitor user EXEC command. You can also
use the show running-config privileged EXEC command to display configured sessions.
Step 6 end Return to privileged EXEC mode.
Step 7
show monitor [ session session_number ]
show running-config
Verify the configuration.
Step 8
copy running-config startup-config (Optional) Save the configuration in the configuration file.
Command Purpose