Cisco ASR 903 Скачать руководство пользователя страница 273

Страница: 273 / 280

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-08

Chapter

Caveats in Cisco IOS XE 3.10S Releases

Symptom:

Crash observed on the router after unconfiguring 1000 psuedowires.

Conditions:

This issue occurs after unconfiguring 1000 psuedowires at a stretch.

Workaround:

There is no workaround.

•

CSCui30240

Symptom:

’SPA is not initialized’ messages are seen on bootup.

Conditions:

This message is seen post bootup as well during

shutdown

command followed by a

shutdown

command is issued on the controller. This issue occurs on remote PE reload.

Workaround:

Disable console logging.

•

CSCui34041

Symptom:

Traffic is not flowing for one of the prefix.

Conditions:

This issue occurs when the MAX MPLS label of that template is assigned to that prefix.

Workaround:

Disable and enable that prefix.

•

CSCui34989

Symptom:

OC-3 IM IOMD crash is seen post SSO.

Conditions:

This issue occura after SSO is performed.

Workaround:

There is no workaround.

•

CSCui47776

Symptom:

Virtual circuit receive counters do not increment after SSO is performed.

Conditions:

This issue occurs when 1000 VCs are configured and SSO is performed.

Workaround:

There is no workaround.

•

CSCui52938

Symptom:

Layer 3 interface adjacency is incomplete.

Conditions:

This issue occurs after the RSP is removed from the router.

Workaround:

There is no workaround.

•

CSCui55567

Symptom:

Traffic convergence for OC-3 IM with TDM features such as serial, MLPPP or POS is

high after RSP SSO.

Conditions:

This issue occurs after SSO is performed.

Workaround:

There is no workaround.

•

CSCui75901

Symptom:

Sync packets are not sent at a regular interval by the router and inter-packet gap is not

within the standard range.

Conditions:

This issue occurs under normal conditions.

Workaround:

There is no workaround.

•

CSCui97872

Symptom:

The controller remains in disabled state after enabling the license.

Conditions:

This issue occurs on performing IM OIR or framing.

Workaround:

Disable the license and enable it.

Содержание ASR 903

























































































































































































































































































Результаты поиска

Содержание ASR 903

Отзывы:

Cisco ASR 903, Руководство пользователя, Страница: 273 / 280

Результаты поиска

Содержание ASR 903

Отзывы: