
15
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-08
Caveats in Cisco IOS XE 3.9S Releases
•
CSCue75372
Symptom: Time-Hog traceback seen after router or IM reloads.
Conditions: This issue occurs on bootup of IM or router.
Workaround: There is no workaround.
•
CSCue87629
Symptom:
INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client “iosd-nile” messages may
appear on the console.
Conditions:
This issue occurs when a
shutdown
followed by a
no shutdown
command is executed
on the G8032 ring interface of a peer or local device.
Workaround:
There is no workaround.
•
CSCue92393
Symptom: CEM SatoP circuits with the router in Core remain in down state after initial
configuration. The
show cem circuit
command output on ASR903 shows that the circuits are down.
Conditions: This issue occurs when the CEM SatoP circuits are configured using script via tcl and
tftp_config. This forces a lot of configuration dump on router console simultaneously. The issue may
also be seen after router reload with saved CEM Satop configurations.
Workaround: Perform a controller
shutdown
followed by a
no shutdown
on OC-3 IM on the router.
•
CSCuf05090
Symptom:
Standby IM resets continuously with running configuration synchronization failure.
Conditions:
This issue occurs after a downgrade of all IMs and the IMS are removed from the slot
and a upgrade is performed.
Workaround:
Reload the router completely.
•
CSCuf35542
Symptom:
PFM is fails for about 5minutes after OIR on the master.
Conditions:
This issue occurs after OIR is performed two times on the master
Workaround:
Wait for 5-6 minutes after the OIR.
•
CSCuf79397
Symptom: F1 is stuck in init state after the standby RSP reloads.
Conditions: This issue occurs on a reload or OIR of the standby RSP.
Workaround: Reload the standby RSP again.
•
CSCug05491
Symptom:
The router drops traffic on VPLS circuits.
Conditions:
This issue occurs when you take the following actions:
–
Configure REP with VLAN load balancing
–
Configure VPLS VFI on the VLANs
–
Issue an stateful switchover (SSO)
Workaround:
There is no workaround.
Содержание ASR 903
