manualshive.com logo in svg

Cisco ASR 903, Руководство пользователя, Страница: 256 / 280

Поделиться
Скачать
Cisco ASR 903 Скачать руководство пользователя страница 256

 

14

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-08

Chapter

  Caveats in Cisco IOS XE 3.10S Releases

Workaround:

 There is no workaround.

•

CSCud09813

Symptom: 

Timestamping does not work in CFM over cross-connected MEP with port channel.

Conditions:

 This issue is observed when you configure CFM over cross-connected MEP with port 

channel from a Cisco ASR 903 router to a Cisco ME 3600 switch.

Workaround: 

There is no workaround.

•

CSCud12624

Symptom: 

Traceback is displayed when you configure the ACR group.

Conditions: 

This issue is observed when you configure an ACR group.

Workaround:

 There is no workaround. 

•

CSCud29491

Symptom:

 A two-level policy with match EFP in parent and PHB-based policy in child can be 

applied.

Conditions: 

This issue is observed when you apply a policy on a physical interface having EFPs on 

that physical interface.

Workaround: 

There is no workaround. This configuration is not supported. 

•

CSCud34630

Symptom: 

The following error message is displayed on the standby machine while using the 

shutdown

 and 

no shutdown

 commands on the ACR controller:

NETWORK_RF_API-3-FAILDECODEDATADESC

Conditions: 

This issue is observed on the standby machine when you configure ACR interface.

Workaround: 

There is no workaround. 

•

CSCud35689

Symptoms: 

The router accepts a queue-limit configuration at the parent level of a policy or at the 

vlan class or port level. 

Conditions: 

This issue is observed when you add a queue-limit configuration on a policy at the 

parent level or at the vlan class or at port level.

Workaround: 

There is no workaround. This configuration is not supported.

•

CSCud35732

Symptom: 

The router does not apply egress CFM MIP filtering.

Conditions: 

This issue is observed when you overwrite a MIP configuration using the ethernet CFM 

MIP level command.

Workaround: 

Instead of overwriting the MIP level configuration, remove and reapply the 

configuration. 

•

CSCud38038

Symptom: 

The router records incorrect delay measurements after a reload.

Conditions: 

This issue is observed under the following conditions:

–

You configure Delay Measurement Message (DMM) on a port-channel interface.

–

The port-channel member links are on different interface modules (IMs).

–

You reload the router.

Содержание ASR 903

























































































































































































































































































Отзывы:

Нет отзывов