manualshive.com logo in svg

Cisco Aironet SERIES, Руководство пользователя программного обеспечения

Поделиться
Скачать
Cisco Aironet SERIES Скачать руководство пользователя страница 411

 

20-21

Cisco IOS Software Configuration Guide for Cisco Aironet Access Points

OL-14209-01

Chapter 20      Managing Firmware and Configurations

Working with Software Images

Note

To avoid an unsuccessful download, use the 

archive download-sw /safe

 command, which downloads 

the image first and does not delete the current running version until the download succeeds.

The download algorithm verifies that the image is appropriate for the access point model and that enough 
DRAM is present, or it aborts the process and reports an error. If you specify the 

/overwrite

 option, the 

download algorithm removes the existing image on the Flash device whether or not it is the same as the 
new one, downloads the new image, and then reloads the software.

Note

The procedure to downgrade an access point IOS is the same procedure for performing an IOS upgrade. 
To downgrade an access point IOS, enter 

archive download-sw /overwrite /reload 

tftp:

[[

//

location

]

/

directory

]

/

image-name. 

The 

/overwrite

 parameter erases the current IOS image, and 

the new downgraded version of IOS is loaded onto the access point. The 

/reload

 option reloads the 

system after downloading the image unless the configuration has been changed and not saved.

Note

If the Flash device has sufficient space to hold two images and you want to overwrite one of these images 
with the same version, you must specify the 

/overwrite

 option.

If you specify the 

/leave-old-sw

, the existing files are not removed. If there is not enough space to install 

the new image and keep the current running image, the download process stops, and an error message is 
displayed.

Step 3

archive download-sw /overwrite /reload 
tftp:

[[

//

location

]

/

directory

]

/

image-name

Download the image file from the TFTP server to the access point, 
and overwrite the current image.

•

The 

/overwrite

 option overwrites the software image in Flash 

with the downloaded image.

•

The 

/reload

 option reloads the system after downloading the 

image unless the configuration has been changed and not 
saved.

•

For 

//

location

, specify the IP address of the TFTP server.

•

For /

directory

/

image-name

, specify the directory (optional) 

and the image to download. Directory and image names are 
case sensitive.

Step 4

archive download-sw /leave-old-sw /reload 
tftp:

[[

//

location

]

/

directory

]

/

image-name

Download the image file from the TFTP server to the access point, 
and keep the current image.

•

The 

/leave-old-sw

 option keeps the old software version after 

a download.

•

The 

/reload

 option reloads the system after downloading the 

image unless the configuration has been changed and not 
saved.

•

For 

//

location

, specify the IP address of the TFTP server.

•

For /

directory

/

image-name

, specify the directory (optional) 

and the image to download. Directory and image names are 
case sensitive.

Command

Purpose

Содержание Aironet SERIES









































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды