16-13
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Chapter 16 Configuring Filters
Configuring Filters Using the Web-Browser Interface
Figure 16-8
Ethertype Filters Page
Follow this link path to reach the Ethertype Filters page:
1.
Click
Services
in the page navigation bar.
2.
In the Services page list, click
Filters
.
3.
On the Apply Filters page, click the
Ethertype Filters
tab at the top of the page.
Creating an Ethertype Filter
Follow these steps to create an Ethertype filter:
Step 1
Follow the link path to the Ethertype Filters page.
Step 2
If you are creating a new filter, make sure
<NEW>
(the default) is selected in the Create/Edit Filter
Index menu. To edit an existing filter, select the filter number from the Create/Edit Filter Index menu.
Step 3
In the Filter Index field, name the filter with a number from 200 to 299. The number you assign creates
an access control list (ACL) for the filter.
Step 4
Enter an Ethertype number in the Add Ethertype field. See
Appendix A, “Protocol Filters,”
for a list of
protocols and their numeric designators.
Step 5
Enter the mask for the Ethertype in the Mask field. If you enter
0
, the mask requires an exact match of
the Ethertype.
Step 6
Select
Forward
or
Block
from the Action menu.
