Accessories
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
61
The following table describes the Cisco Headset 531 and 532 USB Adapter buttons.
Num
Name
Description
Cisco Headset 561 and 562
The Cisco Headset 560 Series are two wireless headsets that are developed for Cisco products
and services. The Cisco Headset 561 features a single earpiece and offers lightweight comfort.
The Cisco Headset 562 features two earpieces for use in a noisy environment or busy office.
The Cisco Headset 560 Series use a headset base to connect with Cisco IP Phones and charge
the headsets. The available options for the base are Standard base and Multibase. The Cisco
Headset 560 Series with Standard Base support connection with a single source from a phone
or a computer. The Cisco Headset 560 Series with Multibase support multiple sources from
phones, computers, and Bluetooth-paired devices and provide an easy and intuitive switch
among the connected sources.
1
Mute button
Toggle the microphone on and off. When Mute on the USB adapter
is enabled, the
Mute
button
on the USB adapter lights up.
2
Volume
button
+
and
–
Adjust the volume on your headset.
3
Call button
Incoming and active call management depends upon if you have
one call or multiple calls.
One call:
1.
Press once to answer incoming calls.
2.
Press once to put an active call on hold. Press again to
retrieve the call from hold.
3.
Press twice to reject an incoming call.
Multiple calls:
1.
Press once to put an active call on hold, and to answer a
second incoming call.
2.
Press once to put a current call on hold and press again
to resume a call.
3.
Press and hold for 2 seconds to end the current call and
press again to resume a held call.
4.
Press and hold for 2 seconds to end an active call, and
to answer another incoming call.
5.
Press twice to stay on a current call, and to reject a
second incoming call.
