Cisco 7975G - Unified IP Phone VoIP Скачать руководство пользователя страница 143

Страница: 143 / 227

7-7

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)

OL-15790-01

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Status Menu

Load Auth Failed

The phone could not load a configuration file.

Check that:

•

A good version of the configuration file
exists on the applicable server.

•

The phone load file being downloaded has
not been altered or renamed.

•

The phone load type is compatible; for
example, you cannot place a DEV load
configuration file on a REL-signed phone.

Load ID incorrect

Load ID of the software file is of the wrong
type.

Check the load ID assigned to the phone (from
Cisco Unified Communications Manager,
choose

Device > Phone

). Verify that the load ID

is entered correctly.

Load rejected HC

The application that was downloaded is not
compatible with the phone’s hardware.

Occurs if you were attempting to install a
version of software on this phone that did not
support hardware changes on this newer phone.

Check the load ID assigned to the phone (from
Cisco Unified Communications Manager,
choose

Device > Phone

). Re-enter the load

displayed on the phone. See the

“Firmware

Versions Screen” section on page 7-11

to verify

the phone setting.

Load Server is invalid

Indicates an invalid TFTP server IP address or
name in the Load Server option.

The Load Server setting is not valid. The Load
Server specifies a TFTP server IP address or
name from which the phone firmware can be
retrieved for upgrades on the phones.

Check the Load Server entry (from
Cisco Unified Communications Manager
Administration choose

Device > Phone

No CTL installed

A certificate trust list (CTL) file is not installed
in the phone.

Occurs if security is not configured or, if
security is configured, because the CTL file
does not exist on the TFTP server.

For more information, refer to

Cisco

Unified Communications Manager Security
Guide

No default router

DHCP or static configuration did not specify a
default router.

•

If the phone has a static IP address, verify
that the default router has been configured.
See the

“Network Configuration Menu”

section on page 4-5

section for details.

•

If you are using DHCP, the DHCP server
has not provided a default router. Check the
DHCP server configuration.

Table 7-2

Status Messages on the Cisco Unified IP Phone 7975G (continued)

Message

Description

Possible Explanation and Action

Содержание 7975G - Unified IP Phone VoIP




































































































































































































































Результаты поиска

Содержание 7975G - Unified IP Phone VoIP

Отзывы:

Похожие инструкции для 7975G - Unified IP Phone VoIP

Бренды по названию

Популярные бренды

Cisco 7975G - Unified IP Phone VoIP, Руководство пользователя программного обеспечения

Результаты поиска

Содержание 7975G - Unified IP Phone VoIP

Отзывы:

Похожие инструкции для 7975G - Unified IP Phone VoIP

Бренды по названию

Популярные бренды