Cisco 7961 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 80

background image

4

OL-11526-01

Using External Devices

The following information applies when you use external devices with the Cisco Unified IP Phone:

Cisco recommends the use of good quality external devices (such as headsets) that are shielded against
unwanted radio frequency (RF) and audio frequency (AF) signals.

Depending on the quality of these devices and their proximity to other devices such as mobile phones
or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take
one or more of the following actions:

•

Move the external device away from the source of the RF or AF signals.

•

Route the external device cables away from the source of the RF or AF signals.

•

Use shielded cables for the external device, or use cables with a better shield and connector.

•

Shorten the length of the external device cable.

•

Apply ferrites or other such devices on the cables for the external device.

Cisco cannot guarantee the performance of the system because Cisco has no control over the quality
of external devices, cables, and connectors. The system will perform adequately when suitable devices
are attached using good quality cables and connectors.

Caution

In European Union countries, use only external speakers, microphones, and headsets that
are fully compliant with the EMC Directive [89/336/EC].

Accessibility Features

A list of accessibility features is available upon request.

«
...
10
11
12
13
14
...
»

Содержание 7961

















































































Отзывы:

Нет отзывов

Похожие инструкции для 7961

WEP870 - Bluetooth Headset

Бренд: Samsung Страницы: 25

WEP301 - Headset - Over-the-ear

Бренд: Samsung Страницы: 2

WEP200 - WEP 200 - Headset

Бренд: Samsung Страницы: 26

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 26

Бренд: Samsung Страницы: 2

WEP180 - Headset - Over-the-ear

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Jabra Страницы: 2

Бренд: Dasan Страницы: 11

Бренд: Connect IT Страницы: 2

Бренд: Lennox Hearth Products Страницы: 8

Бренд: Turtle Beach Страницы: 10

Бренд: Mobility Sound Страницы: 2

Бренд: Jeecoo Страницы: 4

Бренд: Blueant Страницы: 76

Spectralink 7502

Бренд: SpectraLink Страницы: 80

Бренд: Tait Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды