Cisco 7961 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 80

background image

Connecting Your Phone

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.1 (SCCP and SIP)

7

Headset Information

To use a headset, connect it to the headset port on the back of your phone.

Although Cisco Systems performs some internal testing of third-party headsets for use with the
Cisco Unified IP Phones, Cisco does not certify or support products from headset or handset vendors.
Because of the inherent environmental and hardware inconsistencies in the locations where
Cisco Unified IP Phones are deployed, there is not a single “best” solution that is optimal for all
environments. Cisco recommends that customers test the headsets that work best in their environment
before deploying a large number of units in their network.

In some instances, the mechanics or electronics of various headsets can cause remote parties to hear
an echo of their own voice when they speak to Cisco Unified IP Phone users.

Cisco Systems recommends the use of good quality external devices, like headsets that are screened
against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of
these devices and their proximity to other devices such as cell phones and two-way radios, some audio
noise may still occur. See the

“Using External Devices” section on page 4

, for more information.

The primary reason that a particular headset would be inappropriate for the Cisco Unified IP Phone
is the potential for an audible hum. This hum can be heard by either the remote party or by both the
remote party and you, the Cisco Unified IP Phone user. Some potential humming or buzzing sounds
can be caused by a range of outside sources, for example, electric lights, being near electric motors,
large PC monitors. In some cases, a hum experienced by a user may be reduced or eliminated by using
a local power cube or power injector. See the

“Using an External Power Supply” section on page 3

, for

more information.

Audio Quality Subjective to the User

Beyond the physical, mechanical and technical performance, the audio portion of a headset must
sound good to you (the user) and to the party on the far end. Sound is subjective and Cisco cannot
guarantee the performance of any headsets or handsets, but some of the headsets and handsets on the
sites listed below have been reported to perform well on Cisco Unified IP Phones.

Nevertheless, it is ultimately still the customer's responsibility to test this equipment in their own
environment to determine suitable performance.

For information about headsets, see:

http://www.vxicorp.com/cisco

http://www.plantronics.com

«
...
13
14
15
16
17
...
»

Содержание 7961

















































































Отзывы:

Нет отзывов

Похожие инструкции для 7961

Бренд: Uniden Страницы: 8

Бренд: EDIFIER Страницы: 22

Бренд: Topcom Страницы: 48

Бренд: Jabra Страницы: 18

Бренд: Blueant Страницы: 2

Бренд: B-Speech Страницы: 6

Бренд: NetComm Страницы: 36

Бренд: Xtreme Страницы: 4

Бренд: K-Mate Страницы: 8

Бренд: Auta Страницы: 2

Бренд: 2GO Страницы: 12

Бренд: Jabra Страницы: 2

Бренд: AOC Страницы: 51

Бренд: Black Box Страницы: 1

Бренд: Tronsmart Страницы: 38

Бренд: O2 Страницы: 23

Omni Office 8001

Бренд: Alcatel Страницы: 2

Omni Office 4039

Бренд: Alcatel Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды