Cisco 4700 series Скачать руководство пользователя страница 297

Страница: 297 / 418

7-45

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

Chapter 7 Configuring Redundant ACE Appliances

Displaying Redundancy Information

My State (Cont.)

•

FSM_FT_STATE_STANDBY_HOT—Local standby
context has all the state information it needs to
statefully assume the active state if a switchover
occurs.

My Config Priority Priority configured on the FT group in the local ACE.

My Net Priority

Priority of the FT group equal to the configured priority
minus the priority of the FT tracking failures if any.

My Preempt

Preemption value of the FT group in the local ACE.
Possible values are Enabled or Disabled.

Peer State

State of the FT group in the remote ACE. For possible state
values, see the

“My State”

field description.

Peer Config
Priority

Priority configured for the FT group in the remote ACE.

Peer Net Priority

Priority of the FT group in the remote ACE computed from
the configured priority and the priority of the FT tracking
failures.

Peer Preempt

Preemption value of the FT group in the remote ACE.
Possible values are Enabled or Disabled.

Peer ID

FT peer identifier.

Last State Change
Time

Time and date that the peer last changed from the active to
standby state, or standby to active state.

Running Cfg Sync
Enabled

Configured state of config sync for the running-config.
Possible values are Enabled or Disabled.

Running Cfg Sync
Status

Current status of config sync for the running-config. For
example: Running configuration sync has completed.

Startup Cfg Sync
Enabled

Configured state of config sync for the startup-config.
Possible states are Enabled or Disabled.

Startup Cfg Sync
Status

Current status of config sync for the startup-config. For
example: Startup configuration sync is disabled.

No. of Contexts

Number of contexts associated with the FT group.

Table 7-2

Field Descriptions for the show ft group Command Output

(continued)

Field

Description

Содержание 4700 series



































































































































































































































































































































































































































Результаты поиска

Содержание 4700 series

Отзывы:

Похожие инструкции для 4700 series

Бренды по названию

Популярные бренды

Cisco 4700 series, Руководство администратора

Результаты поиска

Содержание 4700 series

Отзывы:

Похожие инструкции для 4700 series

Бренды по названию

Популярные бренды