Cisco 4700 series Скачать руководство пользователя страница 209

Страница: 209 / 418

5-19

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

Chapter 5 Managing the ACE Software

Using the File System on the ACE

Copying Files from a Remote Server

To copy a file from a remote server to a location on the ACE using FTP, SFTP, or
TFTP, use the

copy

command in Exec mode.

The syntax for the command is:

copy

{

ftp://

server

path

[

filename

]

sftp://

[

username

]

server

path

[

filename

] |

tftp://

server

[

port

]

path

[

filename

]} {

disk0:

[

path

]

filename

image:

image_name

running-config

startup-config

}

The keywords, arguments, and options are:

•

ftp://

server

path

[

filename

]—Specifies the FTP network server and,

optionally, the filename.

•

sftp://

[

username

]

server

path

[

filename

]—Specifies the SFTP network

server and, optionally, the filename.

•

tftp://

server

[

port

]

path

[

filename

]—Specifies the TFTP network server and,

optionally, the filename.

•

disk0:

[

path

filename

—

Specifies a file destination in the disk0: file system

of Flash memory. If you do not provide the optional path, the ACE copies the
file to the root directory on the disk0: file system.

•

image:

image_name

—Specifies to copy a system software image to Flash

memory. Use the

boot system

command as described in

Chapter 1, Setting

Up the ACE

to specify the BOOT environment variable. The BOOT

environment variable specifies a list of image files on various devices from
which the ACE can boot at startup.

•

running-config

—Specifies to replace the running-configuration file

currently residing on the ACE in RAM (volatile memory).

•

startup-config

—Specifies to replace the startup-configuration file currently

residing on the ACE in Flash memory (nonvolatile memory).

For example, to copy a startup-configuration file from a remote FTP server to the
disk0: file system, enter:

host1/Admin#

copy ftp://192.168.1.2/ startup-config

Enter source filename[]?

startup_config_Adminctx

File already exists, do you want to overwrite?[y/n]: [y] y

Enter username[]?

user1

Enter the file transfer mode[bin/ascii]: [bin]

Password:

Passive mode on.

Hash mark printing on (1024 bytes/hash mark).

Содержание 4700 series



































































































































































































































































































































































































































Результаты поиска

Содержание 4700 series

Отзывы:

Похожие инструкции для 4700 series

Бренды по названию

Популярные бренды

Cisco 4700 series, Руководство администратора

Результаты поиска

Содержание 4700 series

Отзывы:

Похожие инструкции для 4700 series

Бренды по названию

Популярные бренды