Cisco 15454-TCC - Network Processor Card, Руководство по эксплуатации

Страница: 293 / 458

8-7
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 8 Performance Monitoring
Using the Performance Monitoring Screen
8.1.5 Using the Baseline Button
In Software R3.0 and higher, the Baseline button located on the far right of the screen clears the PM
count displayed in the Current column, but does not clear the PM count on the card. When the current
15-minute or 24-hour time interval expires or the screen view changes, the total number of PM counts
on the card and on the screen appear in the appropriate column.
The baseline values are discarded if you change views to a different screen and then return to the
Performance Monitoring screen. The Baseline button enables you to easily see how quickly PM counts
are rising without having to perform calculations.
Figure 8-5 shows the Baseline button on the
Performance Monitoring screen.
Figure 8-5 Baseline button for clearing displayed PM counts
Procedure: Use the Baseline Button on the Performance Monitoring Screen
Step 1 Open the electrical or optical card of choice. Double-click the card’s graphic in the main (node) view or
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
Step 2
From the card view, click the Performance tab.
Step 3
Click the Baseline button.
55375
Baseline button