VCC-5CL1M
Rev.
905-0003-02
©2015 CIS Corporation. All rights reserved.
33
14.3.
Precaution and Instruction
・
When changing the sequence settings (address 72-82), make sure that sequence control (address 70) is set to OFF. Re-set the sequence control to Auto Mode or
CC Mode after sequence setting again.
・
Sequence control (address 70) cannot be SAVE or INIT, set manually after the power is turned on. (The other sequence settings can be SAVE or INIT.)
・
It is selectable from 2560, 2048, 1920 pixel at horizontal size in sequence control, however, as for the time of 1 line the blanking period will change with the
maximum of the horizontal pixels set in address 55 beforehand.
・
Make more than 80
μ
s exposure time in sequence mode.
・
Minimum trigger interval is 80
μ
s + 25lines (V Blanking width).
The most fast Operation Cycle of each Mode in Sequence Control
2Tap Mode
4Tap Mode
8Tap Mode
10Tap Mode
Horizontal 2560
Pixels
Effective Line (Exposure Line Count)
6
10
20
24
Unit: line
Total Line Count
31
35
45
49
Unit: line
Cycle
499.88
284.38
185.63
168.44
Unit: µs
Frame Rate
2001
3516
5387
5937
Unit: fps
Horizontal 2048
Pixels
Effective Line (Exposure Line Count)
8
14
26
30
Unit: line
Total Line Count
33
39
51
55
Unit: line
Cycle
429.00
253.50
165.75
151.25
Unit: µs
Frame Rate
2331
3945
6033
6612
Unit: fps
Horizontal 1920
Pixels
Effective Line (Exposure Line Count)
8
14
26
32
Unit: line
Total Line Count
33
39
51
57
Unit: line
Cycle
400.13
238.88
157.23
147.23
Unit: µs
Frame Rate
2499
4186
6360
6792
Unit: fps
