CIS VCC-5CL1M, Техническое описание и руководство по эксплуатации

Страница: 13 / 39

VCC-5CL1M Rev. 905-0003-02
©2015 CIS Corporation. All rights reserved.
12
Function Address Data Description
Targeted AE Level 25
0
～
100 Targeted level at AGC and AE ON 0~100
％
Gamma Correction 40 0 OFF (1.0)
1 ON (0.45
）
Binarization
41 0 OFF
1 ON (Standard)
2 ON (Bar code)
3 ON (Manual threshold setting)
Binarization
Threshold 42 0
～
1023 Binarization Threshold (10bit)
Shading Correction 43 0 OFF
1 ON
Shading Detection 44 1 Start the Shading Correction Table Calculation
Vertical Partial (
collective setting
) 50 2 Params 1
st
Param: Start Lin Position (Mirror with Address 51)
2 nd Param: Effective Line Count (Mirror with Address 52)
Vertical Partial (start line position) 51
0
～
2046
Number of start line (by 2 Lines) (Mirror with 1
st
Param in Address 50)
Vertical Partial (effective line count) 52
2
～
2048
Number of effective line (by 2 Lines) (mirror with 2
nd
Param in Address 50)
Vertical Partial Mode 54 0 OFF
1 ON (Values set with Address 50, 51 and 52 are reflected.)
Horizontal Partial Mode (Horizontal pixels
selection) 55 0 Horizontal 2560 Pixels
1 Horizontal 2048 Pixels
2 Horizontal 1920 Pixels
Binning 56 0 OFF
1 2x2 Binning
2 4x4 Binning
Sequence Control
70 0 OFF
1 Auto mode
2 CC mode
Sequence
Index Number 72 0
～
7 The number of active indexes
Sequence
Index 73 8 Params Set the below set number for each active index.
1
st Param:for index0
～
8 th Parameter: for index7
Sequence
Index Repeat Count 74 8 Params 1
st
Param: for index0
～
8
th
Parameter: for index7(1
～
1023)
Sequence
Set 0 75 6 Params
1 st Param: Shutter (Setting range is same as Address 24)
2 nd Param: Gain (Setting range is same as Address 21)
3 rd Param: Horizontal Start Position (0
～
(2560-Image size))
4 th Param: Vertical Start Position (Setting range is same as Address 51)
5 th Param: Horizontal Image Size (Any of 2560,2048 and 1920)
6 th Param: Vertical Effective Line Count (Setting range is same as Address 52)
Sequence
Set 1 76 6 Params
Sequence
Set 2 77 6 Params
Sequence
Set 3 78 6 Params
Sequence
Set 4 79 6 Params
Sequence
Set 5 80 6 Params
Sequence
Set 6 81 6 Params
Sequence
Set 7 82 6 Params
HDR Mode 90 0 OFF
1
Approx. +10dB
2
Approx. +20dB
3
Approx. +30dB
4 Approx. +40dB
Shutter (HDR) 91
1
～
2048
Exposure time settings at HDR Mode,
1
～
2048(Line count)
Changeable only at
HDR Mode=0(OFF)
Factory Settings INIT Set back to Factory Settings
Data Save SAVE Save the data to EEP-ROM