Circutor SVGm, Инструкция по эксплуатации

Страница: 35 / 108

35
Instruction Manual
SVGm
3�8�- PARALLEL CONNECTION OF 2 TO 100 SVGm
The
SVGm
devices can be arranged in parallel. Up to 100 devices can be arranged in parallel, depending
on model.
In the case of installations with devices in parallel, a device must be defined as the “ master ”, while all
others will have “
slave
” devices functions.
The “ master ” will be responsible for measuring the network parameters, so only the current transform-
ers will be connected to it. This allows low-power transformers to be used in these installations, since
an individual transformer does not have to be connected to each device.
Master
1
2 100
...
Figure 27: Connection of 2 to 100 SVGm in parallel (Transformers on the mains side)�
Master
1
2 100
...
Figure 28: Connection of 2 to 100 SVGm in parallel (Transformers on the load side)�
New device can be connected to existing devices without having to shut down or disconnect them. This
ensures capacity can be increased or degraded device in critical installations can be replaced without
affecting the installation, allowing connection without shutting down the device and also making it
possible to achieve 0 MTD (Maximum Tolerable Downtime).
In the event of failure of the “ master ” device, the front connection of the current transformers allows
connection to be changed to a “
slave
” device, reconfigured as the “
master
”, meaning the system re-
sumes operation quickly with minimum downtime.