Circutor DHC-96 Adc, Инструкция по эксплуатации

Страница: 24 / 50

5�3�1�- TYPE OF OUTPUT
In this screen the output type of the analog output is configured
nodE 4-20
-
Use the and keys at the same time to configure the value.
Use the ,key to browse the different options.

Configuration values
Table 16: Configuration values: Type of output�
Type of output
Possible values
4-20
Current output 4 ... 20 mA
0-20
Current output 0 ... 20 mA
12.20
Current output 4 ...12 ... 20 mA
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
5�3�2�- READING FOR THE START OF THE ANALOG OUTPUT
In this screen, the reading value from which the analog output is started is configured.
ds
0.000
Use the , key to modify the value of the flashing digit
When the desired value is shown on the screen, press the key to skip the digit.

Configuration values
Table 17:Configuration values: Reading for the start of the analog output�
Reading for the start of the analog output
Minimum value
0.000
Maximum value
0.5 x
A
Note: In the DHC-96 mAdc model the variable A has a value of 2000, in the DHC-96 Adc model has a
value of 5000 for the measurement range of
5.000
and 1000 for the measurement range of
1.000
.
Note: FS
(End of the analog output) -
DS
(Start of the analog output) ≥ 500
To validate the data, press the key.
24
DHC-96 mAdc, DHC-96 Adc
Instruction Manual