Circutor DHC-96 Adc, Инструкция по эксплуатации

Страница: 30 / 50

5�4�7�- SAVE CONFIGURATION
To save the configuration of the device, press the key until the main screen of the relay output
1 configuration menu is opened,
Figure 16
.
Press the key again to show the validation screen.
SAuE
no
Use the key to browse the different options.

Configuration values
Table 26: Configuration values: Save configuration�
Save configuration
Possible values
no
Exit the configuration without saving the changed values.
yEs
Save the changed configuration values.
Press the key to validate the data and exit the configuration menu.
5�5�- RELAY OUTPUT 2
Figure 18
, shows the main screen of the configuration menu of relay output 2.
do-2
Figure 18:Configuration menu of relay output 2, main screen�
The configuration is the same as for alarm relay 1, see
“5.4.- RELAY OUTPUT 1”.
5�6�- CONFIGURATION OF THE DISPLAY
Figure 19
, shows the main screen of the configuration menu of the display.
SEt
Figure 19: Configuration menu of the display, main screen�
Press the key to open the configuration menu.
30
DHC-96 mAdc, DHC-96 Adc
Instruction Manual