Circutor DHC-96 Adc, Инструкция по эксплуатации

Страница: 28 / 50

5�4�3�- ALARM PARAMETER
This screen is used to configure the parameter that will be used to activate the alarm.
itEn
i--H
ñ-
Use the key to browse the different options.

Configuration values
Table 22: Configuration values: Alarm parameter�
Alarm parameter
Possible values
i--H
Active alarm when the current is higher than the alarm value.
i--L
Active alarm when the current is less than the alarm value.
di1H
Active alarm when digital input 1 is connected.
di2H
Active alarm when digital input 2 is connected.
di1L
Active alarm when digital input 1 is disconnected.
di2L
Active alarm when digital input 2 is disconnected.
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
5�4�4�- CONNECTION DELAY
This screen is used to configure the alarm connection delay.
dELy 0010
Use the , key to modify the value of the flashing digit
When the desired value is shown on the screen, press the key to skip the digit.

Configuration values
Table 23: Configuration values: Connection delay�
Connection delay
Minimum value 0 x 0.1 s
Maximum value 9999 x 0.1 s
Example:
Use program 0050 to configure a value of 5 s.
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
28
DHC-96 mAdc, DHC-96 Adc
Instruction Manual