Circutor DHC-96 Adc, Инструкция по эксплуатации

Страница: 32 / 50


Configuration values
Table 28:Configuration values: Brightness of the display�
Brightness of the display
Minimum value
L1
Maximum value
L5
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
5�6�3�- LIGHT ALARM
If the current value measured by the device is higher than a % of the nominal value, the device can
make the digits on the display start flashing, in the form of a light alarm.
Alr
120.0
Use the , key to modify the value of the flashing digit.
When the desired value is shown on the screen, press the key to skip the digit.

Configuration values
Table 29:Configuration values: Light alarm�
Light alarm
Minimum value
30.0%
Maximum value 120.0%
Note:
If the a value of
0
is programmed, the light alarm will be deactivated.
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
5�6�4�- SAVE CONFIGURATION
To save the configuration of the device, press the key until the main screen of the configura-
tion menu of the display is opened,
Figure 19
.
Press the key again to show the validation screen.
SAuE
no
Use the ,key to browse the different options.
32
DHC-96 mAdc, DHC-96 Adc
Instruction Manual