Circutor DHB-402, Инструкция по эксплуатации

Страница: 37 / 60

The options available are:
8 data bits - no parity - 2 stop bits
8 data bits - even parity - 1 stop bit
8 data bits - odd parity - 1 stop bit
8 data bits - no parity - 1 stop bit
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button. The unit goes back to the
screen shown in
Figure 47
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the outputs menu (
Figure 41
).
Default value
: 8 data bits - no parity - 1 stop bit (
r8n1
)
4�7�8�7� MODBUS COMMUNICATIONS: ADDRESS ( DHB-424 model)
Screen to configure the unit's address on the Modbus network.
The screen flashes between the symbol and the configured value (
Figure 48
)
�
Figure 48: Modbus communications configuration screens: Modbus address�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button. The unit will go back to the screen
shown in
Figure 48
�
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the outputs menu (
Figure 41
)
Range
: 0 ... 247.
Default value : 1
Note:
If the value given to the address is
0
, communications will be disabled.
37
Instruction Manual
DHB-402 DHB-424