Circutor DHB-402, Инструкция по эксплуатации

Страница: 33 / 60

4�7�7� ALARM 4
This menu is used to configure the parameters of alarm 4. This alarm is not linked to a relay in the
DHB-402
model. See section
“4.7.4. ALARM 1”
4�7�8� OUTPUTS (DHB-424 model)
This menu is used to configure the unit's outputs.
Press the button to access the first configuration parameter.
Figure 41:Output configuration screen�
4�7�8�1� ANALOGUE OUTPUT: PARAMETER ( DHB-424 model)
This screen is used to select the parameter to which the analogue output is to be applied.
The screen flashes between the symbol and the configured value. (
Figure 42
)

S
R
DHB-424
Figure 42:Analogue output configuration screen: meter�
To edit the parameter, press the button.

S
R
DHB-424
Type of input that has
been connected to the
unit.
Current time.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
Figure 42
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the outputs menu (
Figure 41
).
Default value:
Type of input that has been connected to the unit (
InP
).
33
Instruction Manual
DHB-402 DHB-424