Circutor DHB-402, Инструкция по эксплуатации

Страница: 28 / 60

Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes back to the screen shown in
Figure 31 .
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the display menu (
Figure 23
).
Range:
-19999 ... 99999.
Default value: 99999
4�7�3�9� EXITING THE MENU
At the end of the menu the screen shown in
Figure 32
appears
�
Press the button to go back to the main screen of the display menu (
Figure 23
).
Figure 32:End of menu screen�
4�7�4� ALARM 1
This menu is used to configure the parameters of alarm 1.
Press the button to access the first configuration parameter.
Figure 33:Alarm relay 1 configuration screen�
4�7�4�1� PARAMETER
This screen is used to select the parameter for which the alarm is to be applied
The screen flashes between the symbol and the configured value. (
Figure 34
).

S
R
DHB-424
Figure 34:Alarm parameter configuration screens�
28
DHB-402 DHB-424
Instruction Manual