Circutor DHB-402, Инструкция по эксплуатации

Страница: 23 / 60

4�7�3�- DISPLAY�
This menu is used to configure the display features.
Press the button to access the first configuration parameter.
Figure 23:Display setup menu
4�7�3�1�- MINIMUM POSITION OF THE DECIMAL PLACE IN THE DISPLAY VALUE
This screen can be used to assign a minimum position to the decimal point being displayed.
The screen flashes between the symbol and the configured value (
Figure 24
).
Figure 24: Configuration screens for the display decimal point�
To edit the parameter, press the button.
To move from one position of the decimal point to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
Figure 24
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the display menu (
Figure 23
).
Default value: 0000.0
4�7�3�2�- LOWER COLOUR�
This screen is used to configure the lower colour of the display. In other words, this is the display colour
when the measured value is below the lower colour limit (see section “
4.7.3.5. LOWER COLOUR LIMIT
.”).
The screen flashes between the symbol and the configured value (
Figure 25
).
Figure 25:Middle colour screens�
To modify the options, press the button.
23
Instruction Manual
DHB-402 DHB-424