Circutor DHB-402, Инструкция по эксплуатации

Страница: 21 / 60

To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the regression of non-linear equa-
tions menu (
Figure 18
).
Range
: 1 ... 21 or No.
Default value: No
Note: If a value of less than 2 is programmed, regressions of non-linear equations will be disabled
(Menus
4.7.2.2 MEASURED VALUES (X )
and
4.7.2.3 EXPECTED VALUES (Yi)
will no longer be accessible. )
4�7�2�2�- MEASURED VALUES (Xi)
This screen is used to configure the value X1 (measured value) corresponding to the first point in the
equation.
The screen flashes between the symbol and the configured value (
Figure 20
).
...
Figure 20:Measured values configuration screens
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes back to the screen shown in
Figure 20
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the regression of non-linear
equations menu (
Figure 18
).
Range
: -19999 ... 99999
Default value: 0
21
Instruction Manual
DHB-402 DHB-424