Circutor DHB-402, Инструкция по эксплуатации

Страница: 20 / 60

To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button.
Validate by pressing the button. The unit goes back to the screen shown in
Figure 16 .
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the input parameters menu (
Figure
13
).
Range: 1 ... 3600 s.
Default value:
1
4�7�1�4�- EXITING THE MENU
At the end of the menu the screen shown in
Figure 17
appears �
Press the button to go back to the main screen of the input parameters menu
Figure 13
.
Figure 17:Exit menu screen�
4�7�2�- REGRESSION OF NON-LINEAR EQUATIONS
This menu is used to configure the parameters to carry out regressions of non-linear equations (see
section “
4.5.- REGRESSION OF NON-LINEAR EQUATIONS”
).
Press the button to access the first configuration parameter.
Figure 18:Regression of non-linear equations menu�
4�7�2�1�- NUMBER OF POINTS
This screen is used to select the number of points to be configured for regressions of non-linear equa-
tions. The screen flashes between the symbol and the configured value (
Figure 19
).
Figure 19:Number of points screens�
20
DHB-402 DHB-424
Instruction Manual