Circutor DHB-402, Инструкция по эксплуатации

Страница: 17 / 60

Figure 11:Password screen
To modify the password, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
If the password is incorrect or no password has been entered, the screen in
Figure 12
will appear and
the unit will go to the display screen.
Figure 12:Incorrect password screen�
If the password is correct, the unit will display the parameters screen
Figure 13�
To permanently unlock the unit, see
“4.7.9.2. PASSWORD”
Note: By default, the unit comes without a password.
4�7�1�- INPUT PARAMETERS
This menu is used to configure the input parameters.
Press the button to access the first configuration parameter.

S
R
DHB-424
Figure 13:Input parameters menu main screen�
4�7�1�1�- TYPE OF INPUT
This screen is used to select the type of input that has been connected to the unit.
The screen flashes between the symbol and the configured value. (
Figure 14
)
Figure 14: Parameter to display screen�
17
Instruction Manual
DHB-402 DHB-424