Circutor DHB-402, Инструкция по эксплуатации

Страница: 39 / 60

To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the services menu (
Figure 50)
.
Default value: No changes made ( no ).
4�7�9�2� PASSWORD
This screen is used to enter a password to access the unit's setup menus.
The screen flashes between the symbol and the configured value (
Figure 52
)
Figure 52:Password screens�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button. The unit will go back to the screen
shown in
Figure 52
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the services menu (
Figure 50
)
Range: 0 ... 60000.
Default value:
0
Note:
If the programmed value is
0
, the menus will not be password-protected.
4�7�9�3� CURRENT TIME
Screen to set the unit's clock to the current time.
The screen flashes between the symbol and the configured value (
Figure 53
).
Figure 53: Current time adjustment screens�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button. The unit will go back to the screen
39
Instruction Manual
DHB-402 DHB-424