Circutor DHB-402, Инструкция по эксплуатации

Страница: 38 / 60

4�7�8�8� EXITING THE MENU
At the end of the menu the screen shown in
Figure 49
appears.
Press the button to go back to the main screen of the outputs menu
Figure 41
.
Figure 49:End of menu screen�
4�7�9� SERVICE
This menu is used to configure the unit's service parameters.
Press the button to access the first configuration parameter.
Figure 50:Services screen
4�7�9�1� DEFAULT CONFIGURATION
Screen used to reset the unit to its default configuration.
The screen flashes between the symbol and the configured value (
Figure 51
).
Figure 51:Default configuration screens�
To edit the parameter, press the button.
The options are:
Restore the original factory parameters.
No changes made.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
If you have selected to restore the original parameters,
YES
, the unit will restore them and go to the
screen shown in
Figure 51
, showing the default option again,
No
.
38
DHB-402 DHB-424
Instruction Manual