Circutor DHB-402, Инструкция по эксплуатации

Страница: 26 / 60

To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes back to the screen shown in
Figure 28
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the display menu (
Figure 23
).
Range: -19999 ... 99999.
Default value:
50.000.
4�7�3�6� UPPER COLOUR LIMIT
This screen is used to configure the value of the upper colour limit.
The screen flashes between the symbol and the configured value (
Figure 29
).
Figure 29:Upper colour limit screens�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the
button.
Validate by pressing the button. The unit goes back to the screen shown in
Figure 29
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the display menu (
Figure 23
).
Range
: -19999 ... 99999.
Default value: 80.000.
26
DHB-402 DHB-424
Instruction Manual