Circontrol Wallbox eNext, Руководство пользователя

Страница: 15 / 48

13
How to use it? -
Plug&Charge
When the EV is fully charged, the LED beacon shows a fixed
blue light.
E
EV fully charged
To finish the charge transaction, stop the charge through the ‘HiCharger’ App (see
Section “D - Management options” in Chapter 7) or stop the charge through the Vehicle.
Once the charge transaction has been stopped, the user will be able to un-plug the
connector.
F Stop charging
Once the connector is un-plugged, the LED beacon bar turns
back to green in a fade-in/fade-out effect.
In this status, the Charge Point is available to start a new charge
The behaviour described is for a Charge Point set with
Plug&Charge identification method. The work flow could
be different depending on the Charge Point settings.
• The EV batteries are too warm to continue the charge transaction.
• A “Stop Charging” was programmed through the Time Schedule in ‘HiCharger’ App.
• There is not enough power available in the installation managed by the BeON.
• The Remote Control is not enabling the charge transaction.
• The user has requested to stop the charge transaction through ‘HiCharger’ App.
i