Circontrol Wallbox eNext Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 48

Circontrol Wallbox eNext Скачать руководство пользователя страница 36

34

Wallbox eNext User Manual

Automatic connection:

This option allows

the

smartphone to directly pair to any Charge
Point from the ‘List’ menu that is available.
This option should be enabled to allow the
Presence Recognition.

Language:

This option allows to change the

language of the App.

Local firmware:

This option allows to check

the latest Charge Point firmware available
and download it to install it later in the Charge
Point. This shall be done before upgrading the
Charge Point firmware if there is no internet
connection near the Charge Point.

C

General

‘HiCharger’ checks the availability of a new Charge Point firmware version when there
is internet connection. ‘HiCharger’ will notify that there is a new firmware with an icon
and the user will be able to download it in the smartphone.

Once the new firmware version has been downloaded, the Charge Point firmware can
be upgraded off-line in the ‘Charger Options’ menu. For further information, please
refer to chapter “8 - Charger Options”.

Local firmware

«
...
34
35
36
37
38
...
»

Содержание Wallbox eNext

















































Отзывы:

Нет отзывов