Cino FuzzyScan A670 Series, Руководство по программированию

Страница: 55 / 94

FuzzyScan
Pr
og
ram
mi
ng Man
ua
l
Configure Your FuzzyScan
49
PROGRAM
Serial Interface Control

Delay Setting

F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Intermessage Delay
SS
MS
None

1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
Intercharacter Delay
SS
MS
None 
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
Interfunction Delay
SS
MS
None

1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate
this selection automatically.
FIN
(2 digits)
 Intermessage Delay is a time delay between messages output by FuzzyScan. Increasing this delay will help host applications process the incoming data on time.
 Intercharacter Delay is a time delay between data characters output by FuzzyScan. These two parameters are used to synchronize data communication when : 1) the data
transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3)
various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two
parameters.
 Interfunction Delay is a time delay between transmission and reception of each segment of the message string.